PRL, Inc. is located in quaint, historic Cornwall, Pennsylvania.

We are located just minutes from the Pennsylvania Turnpike, Interstate Route 81, and Harrisburg International Airport (HIA).  Directions>

 

Our Address and contact numbers are:

  PRL, Inc.
64 Rexmont Rd.
Cornwall, PA 17016

(717) 273-6787 phone
(717) 272-0190 fax
sales@prlinc.com e-mail

PRL, Inc.'s office hours are:
8 a.m. to 5 p.m. Eastern time.
Office hours change to 7:30 a.m. to 4:00 p.m. between Memorial Day and Labor Day.

 

 

DIRECTIONS

 

Directions to PRL, Inc.'s main office, PRL Industries, and Brenner Machine>

Directions to Regal Cast and LTC Machining>

 

 

 

 

Directions to PRL, Inc.'s main office, PRL Industries, and Brenner Machine:

 

-From the PA Turnpike, Rt. 76:   (approximate driving time: 10 minutes)
From the Lebanon/ Lancaster exit, number 266 (old exit number 20):
After proceeding through the toll both, turn left at the traffic light onto Rt. 72 North.
Continue on Rt. 72 North for 3 miles and turn right at the first traffic light onto Rt. 419 North.
Continue on Rt. 419 North for approximately 1mile and turn (bear) right (you will be continuing straight ahead- Rt. 419 actually bears left) onto Alden St. at the Cornwall United Methodist Church.
Proceed through the underpass and make an immediate left onto Rexmont Rd.
Continue for approximately 1/2 mile where road bends to the left.
The entrance to PRL Industries and Brenner Machine is on the right as you round the bend and the entrance to PRL, Inc.'s main office is approximately 100 feet beyond.
See Map

 

-From Harrisburg International Airport: (approximate driving time: 40 - 50 minutes)
Exit the airport following signs to Harrisburg/ PA Turnpike (Rt. 76).
Enter the PA Turnpike (toll road) -East bound towards Philadelphia.
Travel 19 miles and take the first exit for Lebanon/ Lancaster, exit number 266 (old exit number 20)
After proceeding through the toll both, turn left at the traffic light onto Rt. 72 North.
Continue on Rt. 72 North for 3 miles and turn right at the first traffic light onto Rt. 419 North.
Continue on Rt. 419 North for approximately 1mile and turn (bear) right (you will be continuing straight ahead- Rt. 419 actually bears left) onto Alden St. at the Cornwall United Methodist Church.
Proceed through the underpass and make an immediate left onto Rexmont Rd.
Continue for approximately 1/2 mile where road bends to the left.
The entrance to PRL Industries and Brenner Machine is on the right as you round the bend and the entrance to PRL, Inc.'s main office is approximately 100 feet beyond.
See Map

 

-From Rt. 81: (approximate driving time: 30 minutes)
Exit Rt. 81 at the Lebanon, Rt. 72 interchange and enter onto Rt. 72 South.
Follow Rt. 72 South for approximately 15 miles going through the city of Lebanon and turn left onto Rt. 419 North in the town of Quentin.
Continue on Rt. 419 North for approximately 1mile and turn (bear) right (you will be continuing straight ahead- Rt. 419 actually bears left) onto Alden St. at the Cornwall United Methodist Church.
Proceed through the underpass and make an immediate left onto Rexmont Rd.
Continue for approximately 1/2 mile where road bends to the left.
The entrance to PRL Industries and Brenner Machine is on the right as you round the bend and the entrance to PRL, Inc.'s main office is approximately 100 feet beyond.
See Map

 

 

MAP to PRL, Inc. Main Office,  PRL Industries, and  Brenner Machine.

 

 

 

 

 

 

Directions to Regal Cast and LTC Machining:

 

-From the PA Turnpike, Rt. 76: (approximate driving time: 25 - 35 minutes)
From the Lebanon/ Lancaster exit, number 266 (old exit number 20):
After proceeding through the toll both, turn left at the traffic light onto Rt. 72 North.
Continue on Rt. 72 for approximately 5 miles into the city of Lebanon and turn right onto Rt. 422 East.
Get into the left lane where the road bears left at the East end of Lebanon. A shopping center will be on the left as you round the bend. Proceed to stop sign and continue straight entering N. 8 th Avenue. Blockbuster Video will be on the right and McDonalds on the left.
Follow directions below for either LTC or Regal Cast...
See Map

 

-From Harrisburg International Airport: (approximate driving time: 55 - 75 minutes)
Exit the airport following signs to Harrisburg/ PA Turnpike (Rt. 76).
Enter the PA Turnpike (toll road) -East bound towards Philadelphia.
Travel 19 miles and take the first exit for Lebanon/ Lancaster, exit number 266 (old exit number 20)
After proceeding through the toll both, turn left at the traffic light onto Rt. 72 North.
Continue on Rt. 72 for approximately 5 miles into the city of Lebanon and turn right onto Rt. 422 East.
Get into the left lane where the road bears left at the East end of Lebanon. A shopping center will be on the left as you round the bend.
Proceed to stop sign and continue straight entering N. 8 th Avenue. Blockbuster Video will be on the right and McDonalds on the left.
Follow directions below for either LTC or Regal Cast...
See Map

 

-From Rt. 81: (approximate driving time: 20 minutes)
Exit Rt. 81 at the Lebanon, Rt. 72 interchange and enter onto Rt. 72 South.
Follow Rt. 72 south into the city of Lebanon and turn left onto Rt. 422 East.
Get into the left lane where the road bears left at the East end of Lebanon. A shopping center will be on the left as you round the bend.
Proceed to stop sign and continue straight entering N. 8 th Avenue. Blockbuster Video will be on the right and McDonalds on the left.
Follow directions below for either LTC or Regal Cast...
See Map
 

 

  Continued directions to LTC:
Follow N. 8 th Ave. to the railroad tracks. After crossing over the railroad tracks, take the first left onto Weidman St. LTC is on the right after you make the turn..
   
  Continued directions to Regal Cast:
Follow N. 8 th street to the first traffic light and turn right onto Lehman St.
Turn right after one block onto 9th. Ave. Regal Cast is approx. 100 feet on the right.
   

 

 Map to LTC and Regal Cast

 

 

 

CAPABILITIES  |  ABOUT US  |  CONTACT US  |  DIRECTIONS  |  EMPLOYMENT  |  HOME

Copyright 2002 PRL, Inc. All rights reserved. Web site design by Michael A. Hartman of Page Dot Com